specialist personnel to the international oil & gas, petrochemical, power generation
and construction industries. Our clients are predominantly major operating
companies and international engineering or construction companies. We have a
global network with local market knowledge in 97 locations around the world.
Currently, our clientsare looking for some positions based in Indonesia.
Company : Major Operator Company
Employment Status : Contract
Work Location : Jakarta / Cepu
Closing date of advertisement : 1 week
Position :
1. DAM CONSTRUCTION SUPERINTENDENT - INFRASTRUCTURE FACILITIES (LOCAL)
Key Relationships:
. Reports To : EPC-5 Construction Site Manager
. Positions Supervised : Dam Construction Superintendent
Deputy
Job Function:
The Geotechnical Superintendent works in close cooperation with the EPC5
Construction Site Manager to oversee and supervise all dam construction
elements of the Project. This includes verifying that all work performed by
the Contractor and sub-contractors is being executed in accordance with
project specifications. Maintain daily log or activities.
Responsibility And Duties:
. Site supervision of ground investigation fieldworks contracts
ensuring compliance with specification and common practice.
. Site supervision of construction of hydraulic structures
. Evaluating recommended countermeasures for low strength soils in
conctact with structural foundations.
. Verify proper dam foundation slope stabilization and structures,
including soil blending of native and borrow materials.
. Supervision of earthworks placement, embankment material and
foundation treatment including verification , of laboratory and filed
resting.
. Verification dam contruction procedures are followed
Required Knowledge, Qualifications, Skills, And Experiences:
. Degree in Civil/Geological Engineering. 15 years of relevant
experience.
. Relevant working knowledge of soil investigation, laboratory and
field testing including soils material trial mixing and embankment test,
foundations on soft soil and supervision of similar work including
dam/embankment construction.
. Proper knowledge of soil and rock stability analysis (slope
stability, seepage, consolidation and settlement, etc)
. Familiar with geotechnical computer applications
. Well versed in safe work practices.
. Computer literate with experience in using MS Office suite for
preparing reports and maintaining data base
. Thorough understanding of applicable project specifications
. Trained to authorize work permits (e.g. hot work, confined space,
etc.)
. Good oral and written English language skills
2. FIELD CIVIL / STRUCTURAL ENGINEER (LOCAL)
Job Function:
The Field Civil / Structural Engineer - Field Facilities is responsible for:
. Facilitating communication of various project execution issues
among the site Construction team that affect the civil / structural
engineering design
. Gaining alignment with the PMT and Construction team on civil /
structural engineering needs, objectives, and requirements
. Evaluates / comments on civil / structural work performed by the
Contractor and sub-contractors to insure that the work is being executed in
accordance with project specifications, ExxonMobil standards, and regulatory
requirements. Facilitates effective execution of civil / structural
engineering and design routines that align with the project's goals,
objectives, and procedures. Assures accurate and timely communication among
the PMT and Construction team on civil / structural engineering activities,
progress, and issues.
Responsibility And Duties:
. Support the Construction Lead by coordinating/communicating
various issues among the Construction team that affect the civil and
structural engineering design, safety, and regulatory compliance of the work
. Facilitate and coordinate civil / structural engineering technical
work products
. Evaluate / comment work performed by the Contractor and
sub-contractors to insure that the work is being executed in accordance with
project specifications, ExxonMobil standards, and regulatory requirements.
Includes review of civil / structural design drawings and documents.
. Identify and assess deviations to Contract Technical
Specifications and regulatory requirements; ensure that such deviations will
be processed according to project procedures; maintains Deviation Control
Log.
. Steward civil / structural engineering queries from the Contractor
and sub-contractors as well as technical information requests
. Keep Construction Lead informed of civil / structural engineering
progress, deviations, and execution concerns
. Participate actively in the project's change management program
. Steward the process of capturing and communicating civil /
structural engineering and design lessons learned for the project
. Assist the Construction Lead in stewarding the EPC contractor's
activities with respect to civil / structural engineering execution
including:
. Ensure that all affected parties are familiar with engineering
execution plans, procedures, objectives, and overall job requirements
. Ensure that the contractor staffs the project with adequate
numbers of qualified personnel
. Ensure that the contractor employs the appropriate design tools,
including computer hardware and software
. Ensure that the contractor adheres to all appropriate
specifications and standards
. Ensure that the contractor provides all contract documents,
including those referred to in the job spec.
. Reinforce the requirement for the contractor to control the work,
i.e. accurate and timely progress measurement and reporting
Required Knowledge, Qualifications, Skills, And Experiences:
. Broad knowledge of:
. Design standards, specifications, codes, and appropriate safety
criteria
. Onshore facilities and structures design, construction, and
operations
. Engineering administration
. ExxonMobil practices, processes, and expectations with respect to
project engineering
. Bachelor of Science Degree in an engineering discipline,
preferably Civil / Structural
. 10+ years of closely related professional experience, 3+ years of
which should be at the project engineering / engineering management level
. Strong organizational, management, and technical judgment skills
. Ability to adapt to tight deadlines, heavy workloads, and frequent
changes in priorities
. Proficient in Microsoft Office suite of software programs, Lotus
Notes, etc.
. Read, write, and speak fluent English, especially as it applies to
technical and business communications
3. COMMISSIONING MECHANIC & PIPING (local)
Job Function:
. The commissioning specialist - mechanical & piping reports to the
commissioning lead - onshore facilities and his scope of work includes epc1,
2 and 5 projects . The specialist primary function is to collaborate with
the epc contractors to develop project commissioning plans and procedures
for systems and equipment associated with mechanical and piping, and to
execute the project commissioning programs under the leadership of the
commissioning lead.
The specialist shall provide oversight and assists in the execution of the
commissioning and turnover programs and supports all systems completion
activities from construction through stable operations phase. The specialist
shall act as an sme (subject matter expert) in the discipline specific
commissioning activities. The specialist is responsible to provide guidance,
training, and oversight within his discipline regarding commissioning
planning and execution to the pt organization and contractor's systems
completion organization.
Responsibility And Duties (Including But Not Limited To) :
. Provide support and guidance to the epc contractors in the
development of project specific systems completions plan.
. Provide support in the installation and operation of a
computerized completion management system (cms) database for tracking,
certification, and quality control purposes. Monitor the cms database of
engineering parameters, check sheets, and verification criteria.
. Involve operations representatives in commissioning planning and
execution. Ensure operations personnel are familiarized with plant equipment
and systems according to the requirements the operability management plan.
. During detail design phase, under the direction of the
commissioning lead and in collaboration with the epc contractors:
. Provide guidance to epc contractors to ensure proper planning of
commissioning activities and alignment of execution planning with pt and
operations.
. Prepare all commissioning deliverables including turnover and
completion packages (tcp's), work packs, check-sheets, systems boundary
drawings, systems description, minimum equipment testing matrix,
commissioning procedures, preservation/de-preservation plans and procedures,
completion dossiers, final systems list and priorities, commissioning
spares, first fills, commissioning consumables, temporary equipment for
commissioning, etc.
. Create a vendor support register for commissioning activities
including timely mobilization and demobilization dates. Liaise with start-up
lead to integrate commissioning and start-up vendor support requirements
. During construction, commissioning and start-up phases, under the
direction of the commissioning lead and in collaboration with the epc
contractors:
. Provide onsite safety leadership to ensuring safe execution of
commissioning activities and participate in pt safety initiatives
. Execute fat (factory acceptance test) plan and procedures and
ensure that contractors document the execution of fat and upload the fat
results into the project cms database.
. Provide guidance and participate in commissioning activities
during construction completion, static commissioning, dynamic commissioning
and turnover of systems.
. Provide guidance and participate in the execution of discipline
specific commissioning procedures, tcp's and work packs and ensure that they
are executed in accordance with the systems completion specifications.
Assist with trouble-shooting of systems and processes when required.
. Provide guidance and participate in the execution of systems
completion acceptance processes including walk-downs and punch list
activities
. Provide commissioning input for safety and operability reviews
. Review startup and operating manuals and provide input
. Provide timely recommendations in regard to contingency plans and
changing schedules.
. Provide support to the start-up team in the planning and execution
of the facilities start-up and performance test
. Assist in coordinating workshops to capture lesson learned
Required Knowledge, Qualifications, Skills, And Experiences:
. A minimum of 10 years relevant work experience in engineering,
construction or commissioning of oil and gas project facilities or related
industries and/or operations of oil and gas facilities, upstream and/or
downstream, including a minimum of 2 years work experience as a
completion/commissioning specialist in a similar size and complexity project
. Direct "hands on" experience in project commissioning activities
of similar size and complexity.
. Proven expertise in mechanical and piping systems commissioning.
. Excellent working knowledge of mechanical equipment, piping
detail, civil works, and broad-knowledge of site specific mechanical
systems.
. Strong working knowledge of plant processes combined with good
trouble-shooting skills.
. Working knowledge of industry practices, processes, and
expectations with respect to mechanical equipment, piping, electrical,
instrumentation and control systems completions and commissioning.
. Practical experienced in an h2s environment.
. Overseas work experience is desirable but not required.
. Demonstrated excellent interpersonal skills and communication
skills with the ability to interact effectively with project personnel.
. Ability to work in harsh environments and in stressful situations.
. Proficient in microsoft office suite and other related softwares
. Demonstrated willingness to relocate to engineering office site,
installation site and other work sites as required for the banyu urip
onshore projects completion/commissioning.
Company : Major Operator Company
Employment Status : Contract
Work Location : Jakarta / Cepu
Closing date of advertisement : 1 week
Position :
4. PIPELINE ENGINEER SPECIALIST (EXPATRIATE)
Description
A pipeline engineer specialist should possess the capability to fulfill a
project assignment role for technical oversight of all onshore pipeline and
wellpad engineering, design, fabrication, installation and construction
activities. Ensures that the pre-FEED, FEED, or EPC contractor delivers
cost-effective pipeline designs to meet the Project's safety, integrity,
performance, and reliability requirements within budget and schedule.
Ensures that the Project's requirements, as detailed in the Project
Technical Specifications, for all pipelines are met. Facilitates interfaces
among the Engineering Manager, ExxonMobil Development Company (EMDC)
Functions, and the EPC contractor's organization with respect to pipelines
issues.
Responsibilities And Duties
. Acts as project team representative (pipeline engineer specialist)
for EMDC project, including oversight of pipeline contractors. Provides
technical oversight of the engineering contractors that conduct Design
Optimization, FEED, and detailed engineering activities.
. Facilitates interactions between Project Team and EMDC functions
(EMDC Pipelines, EMDC Flow Assurance, EMDC Development Planning, EMDC
Materials, EMDC Installation/Construction, EMDC Facilities, EMDC Cost &
Schedule).
. Interfaces with Upstream Research Company as needed on
pipeline-related analysis/technologies.
. Understands EMDC requirements associated with the collection of
geospatial data as it relates to project route selection and ensures project
contractors capture geospatial data in a geodatabase that meets EMDC Global
Practices requirements
. Participates in reviews of Project pipeline deliverables to ensure
consistent application of pipeline-related technologies and best practices
. Participates on Industry committees as required to advance
pipeline technology or pipeline design standards.
. Steward the pre-FEED, FEED, or EPC contractor's pipelines
engineering, design, fabrication, and installation planning activities
including:
. In-country geotechnical, topographic survey, and field
verification data gathering activities
. Route selection activities
. Pipeline Stress Analysis
. Seismic Design
. Flow Assurance Design
. Assurance that all applicable codes and standards are built into
the pipelines design
. Detailed pipeline expansion loop engineering and design (if
necessary)
. Design of pipeline crossings (roads, rivers, etc.)
. Measurement and reporting of engineering, fabrication, and
installation physical progress
. Review of squad-check drawings and other deliverables as required
for cross discipline design coordination
. Review of vendor data for completeness of information required for
pipelines design and compliance with project specifications
. Fabrication, transportation, and installation planning of
pipelines items
. Transportation analyses as required
. Advise the pre-FEED, FEED, or EPC contractor's pipeline design,
fabrication, and transportation and installation planning effort with
respect to:
. Drawings, calculations, specifications, and/or results of special
studies
. Engineering analyses as required for the design of onshore
pipelines expansion loops including pipe stress analyses for support and
loading requirements
. Pipeline crossings
. Design of corrosion coating systems, cathodic protection systems,
and weight-coating, as required
. Evaluation and analyses of stress design
. Compliance with design methods and safety factors to be used in
design of project
. Development and implementation of preventive measures to avoid
possible accidents during storage, transportation, and installation
. Procedures and method statements for safety and constructability
issues
. Design of crossings and/or special sections for integrity,
methodology, constructability, and reinstatement
Qualifications
Education
. BS/MS/PhD in Mechanical, Structural, Ocean, or Aerospace
Engineering
. Related Experience
. 15+ pipeline engineering, fabrication and
construction/installation experience (age between 30 years to 60 years old
to meet SKMIGAS requirements)
. Onshore pipeline design technical experience strongly desirable
. Skills
. Highly motivated and ability to handle highly complex and diverse
assignments while applying a high level of independent action
. Strong communication skills (ability to speak/understand
Indonesian language will be a plus)
. Strong coordination / task prioritization and ability to develop
integrated, fit-for-purpose engineered solutions
. Strong technical and business judgments
. Ability to work effectively in teams and influence others
. Collaborates effectively with other disciplines consistent with
EMDC's multidisciplinary approach to projects
Experience or knowledge in the following areas:
. Design and optimization of pipeline systems (e.g. life-cycle
tradeoffs of pressure, pipe size, pipe wall thickness, welding,
compression/pump power requirements, operational envelope and environmental
impact)
. Onshore Pipeline and Wellpad Front End Engineering and Detail
Design
. Onshore Pipeline metering system, blowdown system and leak
detection system
. Onshore Pipeline valve station design and installation
. Onshore Pipeline construction
. Onshore Pipeline HUC, pre-commissioning and startup
5. PLANNING & CONTROL ENGINEER - SCHEDULE (EXPATRIATE)
Key Relationships:
. Reports To : Construction Lead FSO (304)
. Positions Supervised : None
Job Function:
. Provides Cost and schedule information to using system and methods
for project management, cost control, schedule, etc
. Implements all aspects of the project change management,
estimating, cost control, progress measurement and schedule control.
Responsibility And Duties:
. Provides overall project cost, schedule, estimating, progress
measurement and change management leadership and expertise.
. Review the contractor's procedures for estimating, scheduling and
change control and modify as necessary to meet the Company's needs
. Participates in kick-off meetings with contractor and PMT to
ensure common understanding of cost, schedule, estimating, and change
management requirements.
. Coordinate, monitor and assess contractors efforts in project
controls and lead site office project control meetings.
. Ensures that appropriate project control tools are being used by
the contractor in the management of the contract
. Conduct briefing sessions for project team members with respect to
project control requirements and processes.
. Steward contractor's project control organization with respect to:
. Working with company's guidelines and contract requirements
. Achieving OIMS requirements
. Appropriate project tools are being used to assist in the
management of the contract
. Project cost and schedule deliverables and relative timings.
. Change control
. Estimating, including management of controls estimate
. Contract requirements for cost and schedule control and reporting.
. Advise contractor's organization with respect to:
. Project controls tools and reports
. Contractor's effort in cost, schedule estimating and change
control
. Provide timely review of cost and schedule impact of changes,
modifications or alternatives by keeping abreast of engineering, procurement
and construction activities and maintain project metrics, input into monthly
reports, trend, critical path reporting and change order logs. Verify weekly
and monthly progress
. Prepare all required cost and schedule reports and provide project
cost input into Project Monthly Report.
. Prepare cost forecast to insure budget requirements are within
project expectations and keep management aware of potential budget problems
as early as possible
. Administer all changes in work and keep a running record of the
effect on total project cost and schedule
. Participate in gathering and recording lessons learned for the
project.
. Cooperate with IPR teams and post audit activities with respect to
project services functions.
. Assist in the preparation of commercial terms and other
documentations for the EPC bid packages.
Required Knowledge, Qualifications, Skills, And Experiences:
. Thorough and extensive knowledge of:
. Project controls principles, theories and concepts.
. ExxonMobil Practices, processes and expectations with respect to
project controls
. Bachelor of Science in Engineering or Engineering Technology
. 5+ years of cost and schedule experience with a relatively uniform
mix of cost and schedule controls achievements.
. Prior overseas experience with Engineering and procurement phase
of capital projects.
. Upstream/Offshore/Engineering, Procurement and construction
experience
. Experience with project control software programs such as
Microsoft office Profession Suite of software programs, Lotus notes and
scheduling software (Primavera, etc.
. Good written and verbal communications skills.
. Good technical/business team skills, ability to work with others.
. Read, write and speak fluent English at a professionally competent
level whether dealing with technical or commercial issues
. Willing to work overseas in a team environment.
6. PLANNING & ECONOMICS ANALYST (local)
Job Function:
The position has two main responsibilities:
. providing economic analysis expertise to the project for
evaluation of project economics, including sensitivities, and including
supporting trade off decisions through the project planning and execution
phases.
. providing business analysis and planning expertise in developing
the annual program and budget
Responsibility And Duties:
. The position is responsible for understanding in detail the PSC,
Unit Agreement and Unit Operating Agreement terms, expert understanding of
economic modeling, expert understanding and insight into economic metrics
such as DCFR, Present Value of Profit, Maximum Cash Impairment, Cost
Recovery mechanisms.
. Examples of the economics analysis activities are:
. Supporting project trade off decisions throughout the project's
engineering phase
. Support for an adapted open book model for discussion with
external stakeholders
. The position will also be responsible for coordinating development
of annual planning/ program and budget cycle.
. Assisting in gathering supporting documentation for the annual
planning/ program and budget; assisting with review with Co-Venturers and
SKK Migas staff prior to submission. Assisting with follow up from those
reviews.
Required Knowledge, Qualifications, Skills, And Experiences:
. Bachelors or equivalent degree in engineering or business
. Broad upstream oil and gas industry experience including economic
analysis and development planning experience.
. Previous experience of a PSC preferable
Company : Drilling Company
Employment Status : Contract
Work Location : Jakarta
Closing date of advertisement : 1 week
Position :
7. SR ACCOUNTANT (local)
- Job Summary
This position is responsible for all areas relating to financial reporting.
This position will be responsible for developing and maintaining accounting
principles, practices and procedures to ensure accurate and timely financial
statements
- Key Responsibilities
o Responsible for finance department, ensuring all corporate procedures
are followed and reporting is completed in a timely manner; Assists Managing
Director with all financial matters;
o Insures divisional reports comply with corporate financial reporting
requirements;
o Insures accounting practices follow legislated and valid accounting
principles;
o Provide directors and corporate management with up-to-date financial and
tax legislation changes;
o Assists Marketing Dept with tendering, as needed;
o Manage financial resources, evaluate corporate risk for insurance
purposes and provide recommendations to management;
o Evaluates internal controls and provides recommendations to management;
o General review of accounting record, financial statements and prepare
analysis of budget variances;
o Prepare statutory financial statements and coordinate completion of
annual tax returns with audit firm;
o Assists management with preparation of budgets;
o Assist in the review of contractual arrangements.
o Coordinating the Finance and Accounting Dept. staff development in
training and work progress and coordinating with HR Dept. to develop a
Personnel Development Plan as required
o Coordinate and oversees all tax related activities, including Invoicing,
Payment and Audit.
- Weekly Tasks
o Weekly cash calls or treasury reporting weekly.
o Evaluating and reporting of all cash management issues
o Weekly cash forecast and cash collection, as needed
- Monthly Tasks
o Forecasting Expenditures
o Monthly Financial Report to Top Management
- Annual Tasks
o Conducting Internal Audit
o Assisting in External Audit
o Assisting Top Management in Annual Budgeting
- Job Skills
o Finance Management
o Accounting Management
o Internal Auditing
o Cost/Inventory Control
o Tax Management
- Soft Skills
o Leadership
o Trustworthiness
o Presentation
o Problem Solving
o Responsibility
o Team Work
o Communication
o Time Management
- Educational Level
o Bachelor Degree
- Specific Study Major
o Finance or Accounting
- Age
o <40 years old
8. DRILLING MANAGER (local)
Summary:
- Responsible for directing and coordinating day-to-day drilling
activities
- Determine appropriate personnel, equipment and/or materials are
deployed to work site
- Ensuring work order requirements are efficiently executed
- Ensures all equipment is maintained and in good working order
- Monitors new equipment development and drilling site activities
- Ensures department budget is managed effectively
- Manages onsite supervisory personnel
Requirements:
- 15+ Years of supervisory Oil and Gas Drilling Experience,
- Bachelor Degree, or high school degree with an additional 2 years
experience
- Having extensive experience in Managing Drilling Operations and
Projects, with a proven track record
- Having experience in supervising / operating Hydraulic Rig is an
advantage
- Preferably having IADC/IWCF Wellcap Certification and valid
Supervisor Migas Certificate (APB)
- Willing to travel regularly to work locations
Company : Major Operator Company
Employment Status : Contract
Work Location : Qatar
Closing date of advertisement : 1 week
Position :
9. PANEL OPERATOR (local)
. Candidates should have a minimum of secondary education;
engineering diploma is preferred, with at least 15 years experience as a DCS
Panel Operator in a gas processing facility with preference for LNG
liquefaction knowledge.
. In addition, candidates must meet the following competency
requirements:
. High aptitude with safety management systems
. High level of competency in relationship and team building
including communicative skills between peers in the English language
. Transparency in reporting of production process problems, sharing
of knowledge and lessons learned.
. High focus on process operations optimization and efficiencies
including minimizing all flaring
. High focus in work management processes including permit to work,
equipment isolations, temporary control system defeats, etc
10. PROCESS OPERATORS (local)
. Applicants should have a minimum of Secondary education with at
least 15 years of experience in LNG, LPG, Sour Gas Processing, Sulphur
Recovery, Refinery or a similar process environment together with a
mechanical aptitude and basic knowledge of process instrumentation and DCS
Operations.
. In addition, candidates must meet the following competency
requirements:
. High aptitude with Safety Management Systems
. High level of competency in relationship AND team building
including communicative skills in English Language between peers.
Please send your CV, ID card copy and copies of relevant certificates to:
<mailto:resume@brunel.co.id> resume@brunel.co.id with specific "position" in
subject of email. For example, "PLANNING & ECONOMICS ANALYST". Only
shortlisted candidate will be process on next step.