PT. Inti Brunel Teknindo is the sole agent for Brunel Energy
(www.brunelenergy.net), provides specialist personnel to the international
oil & gas, petrochemical, power generation and construction industries.
Our clients are predominantly major operating companies and international
engineering or construction companies. We have a global network with local
market knowledge in 97 locations around the world.
Currently, our clients are looking for some positions based in Indonesia.
COMMISSIONING COORDINATOR
For National
. Proven experience (15 - 20 years) in the planning and
execution of commissioning for large offshore facilities, and ability to
seek out and leverage lessons learnt from recent field start-ups to
complement own experience.
. Ability to develop workplans in collaboration with several
functional groups to ensure that a fully integrated approach to
commissioning is adopted. Strong planning capability.
. Knowledge of subsea facilities and the commissioning interfaces
with topsides facilities
. As a minimum educational requirement, a Bachelors degree in
Engineering and Science
HULL ENGINEER - STRUCTURAL
For National
. 5+- years of proven experience in the design and construction of
floating structures such as Semisubmersible, Tension leg platform, FSO/FPU,
FPSO, Oil Tanker , Bulk Carrier and Sea-going vessel in accordance to
Classification Society and International industrial standard
. Familiar with IACS rule and Classification Society requirement on
the floating structure global strength, fatigue and it's stability
. Experience in the Global Strength Analysis (such as 3 cargo hold
analysis, Dynamic Loading Approach analysis and Spectral Fatigue Analysis)
. Experience with structural analysis software and FEM analysis
software such as Nastran, Femap, ANSYS and Abacus
STRUCTURE ENGINEER (OFFSHORE)
For National
. Bachelor/Master Degree in Engineering (Marine/Naval Architect
Engineering or Structure Engineering)
. 6+ years of proven and specialist experience in Engineering as
Marine/Naval Architect Engineer or Structure Engineer in offshore design.
. Having experience for engineering of offshore (platform or
FPSO/FPU) project design, fabrication and installation.
. Familiar with industry and regulatory codes, standards and
recommended practices from ABS, DNV, HES standard (e.g. SID), BKI, etc.
. Good skill in using various engineering software packages such as
SACS, FEM, ANSYS, etc. Familiar with AQWA and Orcaflex or similar.
. Familiar with Global Performance Analysis, Stability Analysis,
Weight Control, Static and Dynamic Load Calculation, Global & Local
Structural Analysis.
. Having experience in supervising contractors, monitoring and
approving contractor's plans, procedures, and work output (e.g.
deliverables).
. Knowledgeable of production operations and installation interfaces
with Operations (Permit to Work, SIMOPs, Start-Up Procedures and Operations)
is an advantage.
. Works effectively with others and strives to reach agreement on key
interface issues. Has high ability to achieve goals using influence and
trust. Ability to work with Operations Field Personnel is important
. Willing to be travel and positioned in the field within
fabrication/ construction phases
SUBSEA MATERIALS MANAGEMENT ADVISOR
For National / Expatriate
. Bachelor Degree in Business Administration or related field.
Diploma/Certificate in Procurement/ Supply Chain Management would be an
advantage.
. Prefer minimum 15 years experience in Procurement and Supply Chain
function, particularly related to subsea equipment.
. Knowledgeable on ERP systems/tools such as SAP, Ariba and JDE would
be an advantage.
. Demonstrated excellent planning, analytical, people skills and
communication skills are essential to the job.
. Demonstrated proficiency of working and communicating with a
multi-functional asset team.
. Willing to travel to global manufacturing and fabrication
locations.
. Demonstrated safety leadership and disciplined application of
operational excellence management systems.
SUBSEA CONTROLS AND IWOCS ENGINEER
For Expatriate
. Minimum 15 years experience in Subsea Production Controls and
IWOCS.
. Bachelor Degree in Engineering preferred
. In lieu of degree, relevant certificates as well as 20 years of
subsea experience with at least 15 years related to Subsea Controls and
IWOCS will be considered
. Candidates must be willing and able to fulfill business travel
requirements.
. Capable of serving as Site Lead on projects, including generation
of detailed functional specifications, review of design and test
documentation, interface management, QA/QC and testing oversight,
integration testing, installation and system commissioning.
. Able to manage technical and commercial aspects of contracts as
well as interfaces between vendors and various project stakeholders.
. Experienced with applicable industry and regulatory codes,
standards, and recommended practices of subsea equipment and systems.
. Demonstrated ability to coordinate and direct the efforts of others
to achieve exceptional performance standards.
. Demonstrated ability to work with minimal supervision, be
self-directing, and exhibit due diligence in pursuit of objectives.
. Experienced in project controls, including effective work planning,
risk assessment, contingency plans, contract management, and demonstrated
business acumen.
. Strong communicator, who excels at building relationships with
customers, contractors and colleagues,
. Places the highest priority on health and safety, in addition to
the protection of assets and the environment.
. Demonstrated safety leadership and disciplined application of
operational excellence management systems.
SUBSEA EQUIPMENT INSTALLATION ENGINEER
For Expatriate
. Bachelor/Master Degree in Engineering (Mechanical, Civil or Ocean)
. 12+ years of proven and specialist experience in offshore
installation and commissioning on deepwater subsea projects with knowledge
in deepwater installation and construction support engineering of PLEM, well
and flowline jumpers, flying leads, manifolds and foundations.
. Over the last 8 years Candidate must have spent a minimum of 5 yrs
holding position as Lead Equipment installation Engineer either with an O&G
Operator or an Installation Contractor.
. Knowledge of offshore deepwater survey positioning system, ROVs,
ROV tools, vertical jumper connector tools, deployment systems of Flying
Leads (hydraulic, electric and optical), installation rigging design and
selection, deepwater lowering systems, etc.
. Experience planning and executing deepwater offshore installation
and commissioning activities for Subsea Equipment (contracting, vessel
coordination, interface management, simultaneous operations (SIMOPS), etc).
. Experience in Interfacing with Subsea Equipment Vendor (SEV) and
Subsea Installation Contractor (SIC).
. Experience in defining and incorporating project HSE requirements
into final project specification for execution and post-project operations.
. Familiar with industry and regulatory codes, standards and
recommended practices from API, ASME, DNV etc.
. Experience in managing contracts; monitoring and approving
contractor's plans, procedures, and work output; knowledge of contract
management procedures.
. Knowledgeable of production operations and installation interfaces
with Operations (Permit to Work, SIMOPs, Start-Up Procedures and
Operations).
. Works effectively with others and strives to reach agreement on key
interface issues. Has high ability to achieve goals using influence and
trust. Ability to work with Operations Field Personnel is important
. Willing to be travel and positioned in the field within
fabrication/construction phases
SUBSEA UMBILICAL ENGINEER - BANGKA
For Expatriate
. 15+ years of specialist experience with proven experience in the
design and construction on deepwater subsea projects with knowledge in
deepwater design of steel tube umbilicals and flying leads.
. Experience in defining and incorporating project HSE requirements
into final project specification for execution and post-project operations
. Demonstrated experience on deepwater umbilical design for complex
subsea and export pipeline systems. Familiar with company design standards
and industry specifications & guidelines.
. Experience in managing contracts; monitoring and approving
contractor's plans, procedures, and work output; knowledge of contract
management procedures.
. Knowledgeable of production operations and installation interfaces
with Operations (Permit to Work, SIMOPs, Start-Up Procedures and
Operations).
. Works effectively with others and strives to reach agreement on
key interface issues. Has high ability to achieve goals using influence and
trust. Ability to work with Operations Field Personnel is important.
HULL PROJECT ENGINEER
For Expatriate
. Excellent communication skills
. BS or MS Degree in Engineering: Mechanical, Civil or Structural
or Naval Architecture - or its equivalent
. Minimum 5 years (MS degree) or 7 years (BS degree) experience in
designing floating offshore structures and has been involved in the detail
engineering , construction phase and/or installation phase.
. Familiar with IACS rule, Classification Society requirement and
international industrial standard for floating structure
MATERIALS ENGINEER
For Expatriate
. Bachelor/Master Degree in Engineering or Material Science -
Master's degree would be an advantage.
. Comprehensive understanding of material properties and material
degradation, corrosion and cracking mechanisms that affect integrity and
reliability of oil and gas production equipment.
. Prefer minimum 15 years experience of materials and corrosion
engineering of upstream oil and gas production equipment and facilities,
particularly related to subsea equipment.
. Demonstrated proficiency of working and communicating with a
multi-functional asset team.
. Understands and is proficient in material standards applied to O&G
industries.
. Willing to travel to global manufacturing and fabrication
locations.
. Demonstrated safety leadership and disciplined application of
operational excellence management systems.
MOORING ENGINEER
For Expatriate
. BS or MS Degree in Engineering: Naval Architecture, Structural,
Mechanical, Civil - or its equivalent
. Minimum 7 years (MS degree) or 10 years (BS degree) experience in
designing mooring systems for floating offshore structures and has been
involved in the detail engineering , construction phase and installation
phase.
. Fully conversant with selection and design of deepwater mooring
systems, including mooring configuration and global performance analysis in
relation to mooring and riser system.
. Familiar with IACS rule, Classification Society requirement and
international industrial standard for mooring system and global performance
SR. COMMISSIONING SPECIALIST INSTRUMENTATION & CONTROL
For Expatriate
. Bachelors degree in Instrumentation Engineering or relevant
Certification courses
. Minimum 10-15 years experience in oil and gas and / or
petrochemical industry
. 5-10 years in pre-commissioning and commissioning of
instrumentation & control systems
. Familiarity with construction activities such as instrument
calibration, testing and installation; cable installation; cable continuity
and insulation testing; instrument tubing cleaning, flushing and leak
testing; alarm and shutdown setting adjustment; control system function
testing; loop testing; hot oil flushing of tubing; preservation etc.
. Familiarity with instrumentation software such as INTOOLS etc.
Familiarity with commissioning software
. Hands on experience with ICSS, SIS, F&G and Subsea Control
System
. Experience in management of multinational workforce and
sub-contractor organizations.
. Familiarity with industry codes and standards
. Preferable, non-mandatory - Valid Sea Survival and HUET
certification
SR COMMISSIONING SPECIALIST MECHANICAL
For Expatriate
. Bachelors degree in Engineering or relevant Certification
courses
. Minimum 10-15 years experience in oil and gas and / or
petrochemical industry
. 5-10 years in pre-commissioning and commissioning of topsides
facilities
. Familiarity with construction activities such as piping
fabrication, cleaning, pressure testing, pump and vessel installation etc.
. Familiarity with ASME and API codes and standards
. Preferable, non-mandatory - Valid Sea Survival and HUET
certification
Please send your CV, ID card copy and copies of relevant certificates to:
resume@brunel.co.id with specific "POSITION" in subject of your email. Only
shortlisted candidate will be process on next step.
